Products & Services

Movitec-H-(S)I

Design
Multistage horizontal high-pressure centrifugal pump
Application
Spray irrigation, general irrigation, washing, water treatment, fire-fighting and pressure booster systems, hot water and cooling water recirculation, boiler feed systems, etc.

Movitec VCI

Design
Multistage vertical high-pressure immersion pump for installation on tanks or platforms.
Application
Machine tools, industrial machine systems, condensate transport, paint shops.

Multitec 200-250

Design
Multistage horizontal centrifugal pump in ring-section design, long-coupled, with radial suction nozzle, cast radial impellers. Application
Water and drinking water supply systems, pressure boosting systems, irrigation systems.

Multitec E-F-C

Design
Multistage horizontal or vertical centrifugal pump in ring-section design, close-coupled, with axial or radial suction nozzle, cast radial impellers.
Application
Water and drinking water supply systems, general industry, pressure boosting systems, irrigation systems, in power stations, heating, filter, fire-fighting, reverse osmosis and washing plants, snow guns, etc.

Etanorm

Design
Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Application
Pumping clean or aggressive liquids not chemically or mechanically aggressive to the pump materials in water supply systems, cooling circuits, swimming pools, fire-fighting systems, irrigation systems, drainage systems, heating systems, air-conditioning systems, spray irrigation systems

Etabloc

Design
Single-stage close-coupled volute casing pump, with ratings to EN 733, with replaceable shaft sleeve and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Application
Pumping clean or aggressive liquids not chemically or mechanically aggressive to the pump materials in water supply systems, cooling water circuits, swimming pools, fire-fighting systems, irrigation systems, drainage systems, heating systems, air-conditioning systems, spray irrigation systems

Hya Solo D

Design
Fully automatic package single-pump system with 8-litre membrane-type accumulator. The system is started and stopped as a function of pressure. Application
Water supply systems for residential and office buildings, irrigation and spray irrigation, rainwater harvesting and service water supply systems in trade and industry.

Hya Solo D FL

Design
Fully automatic package single-pump system. The system is started and stopped as a function of pressure. Design and function as per DIN 14462. Application
Fire-fighting systems to DIN 14462

Calio-S

Design
Maintenance-free high-efficiency screw-ended glandless pump with high-efficiency electric motor and continuously variable differential pressure control.
Application
Heating, ventilation, air-conditioning and heat recovery systems, cooling systems, industrial recirculation systems.

Etabloc-SY

Design
Fan-cooled, single stage volute casing pump, close-coupled to standardized motor.
Application
Heat transfer systems (DIN 4754) or hot water circulations systems.

Etaline-L

Design
Single-stage close-coupled in-line volute casing pump, with PumpDrive variable speed system and common motor/pump shaft
Application
Heating systems, air-conditioning systems, cooling circuits, water supply systems (not approved for drinking water according to the German Environment Agency), service water supply systems, industrial recirculation systems, swimming pools

Etaline

Design
Single-stage volute casing pump in in-line design, with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system; pump shaft and motor shaft are rigidly connected. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Application
Hot water heating, cooling circuits, air-conditioning, water supply systems, service water supply systems, industrial recirculation systems

Emporia CP

Design
Single-stage centrifugal pump in close-coupled design, extremely quiet operation, for use in domestic, public and industrial applications
Application
Spray irrigation systems, general irrigation systems, water supply systems

Emporia MB

Design
Multistage centrifugal pump, with 2 impellers, for use in public and industrial applications
Application
Spray irrigation systems, general irrigation systems, water supply systems

Multi Eco Pro

Design
Multistage self-priming centrifugal pump in close-coupled design, with power cable, plug and Controlmatic E automatic control unit for starting and stopping the pump in line with consumer demand and protecting it against dry running. Automated with automatic control unit.
Application
Single- or two-family houses, agricultural facilities, spray irrigation systems, irrigation systems and washing plants, water supply and rainwater harvesting.

KSB Delta Solo

Design
Fully automatic single-pump system available in two variable speed versions. The frequency inverter operated MVP and SVP versions ensure variable speed control of the pump by motor-mounted frequency inverter for asynchronous motors (MVP) or PumpDrive variable speed system and KSB SuPremE motor (SVP), respectively, providing fully electronic control to ensure the required supply pressure.
Application
Water supply systems for residential buildings and office buildings, irrigation systems and rainwater harvesting systems, service water supply systems, in trade and industry.

CHTC

Design
Horizontal high-pressure barrel-type pumps with radial impellers, single-entry and double-entry, multistage, with flanges or weld end nozzles to DIN and ANSI.
Application
Pumping feed water and condensate in power stations and industrial plants, generation of pressurised water for bark peeling and descaling units.

CHTD

Design
Horizontal high-pressure barrel-type pump with radial impellers, single-entry and double-entry, multistage, with flanges or weld end nozzles to DIN, APIÂ 610 and ANSI.
Application
Refineries, petrochemical industry, steam generation, seawater injection in crude oil production (onshore and offshore)

HPH

Design
Horizontal radially split volute casing pump in back pull-out design, with centreline pump feet, with radial impeller, single-entry, single-stage. Optional TRD type testing by TÃœV. ATEX-compliant version available.
Application
Pumping hot water in high-pressure hot water generation plants, as boiler feed or recirculation pump

LUV Nuclear

Design
Vertical pump with integrated motor, single-entry, single- to three-stage. Suitable for very high inlet pressures and temperatures. Integrated wet winding motor to VDE. Product-lubricated bearings, no oil supply systems required. Design to ASME Section 3, KTA, etc.
Application
As reactor water clean-up pump in boiling water reactors, reactor coolant pump in boiling water and pressurised water reactors and recirculation pump in test facilities.

Multtec A-B-C-D

Design
Multistage horizontal or vertical centrifugal pump in ring-section design, long-coupled or close-coupled, with axial or radial suction nozzle, cast radial impellers and motor-mounted variable speed system. ATEX-compliant version available.
Application
Water supply, drinking water supply, industry, pressure boosting, irrigation, power stations, heating systems, filtering systems, fire-fighting systems, reverse osmosis systems, snow-making systems and washing plants.

MZ

Design
Self-priming multistage liquid ring pump in close-coupled (EZ B) or long-coupled (EZ L) design, with mechanical seal.
Application
Boiler feed applications, sanitary hot water, hydrophore systems for fresh or seawater and fresh water pre-heating.

Hya Solo DFL

Design
Fully automatic ready-to-connect break tank package booster set for fire fighting, comprising a single-pump system and break tank. The system is started and stopped as a function of pressure. Design and function as per DIN 14462.
Application
Fire-fighting systems

KSB Delta Macro

Design
Fully automatic pressure booster system with 2 to 6 vertical high-pressure pumps in cascade and two variable speed versions. Cascade (K) version is fully electronic control to ensure the required supply pressure. Frequency inverters version VP and SVP have continuously variable speed control of each pump by inverter in cabinet (VP) or PumpDrive and SuPremE speed control system (SVP) to fully electronic control of the required supply pressure. Automated with BoosterControl.
Application
Pressure boosting in residential buildings, hospitals, office buildings, hotels, department stores, industry, etc.

WKLN

Design
Horizontal high-pressure centrifugal pumps in ring sectional design, single- or multistage, vertically split suction, discharge and stage casings.
Application
Municipal and industrial water supply in water works, pressure boosting installations, irrigation and sprinkler plants; as boiler feed pumps and condensate pumps, cooling water and hot water circulation pumps; for high pressure water in hydraulic presses, as fire pumps etc.

WKT

Design
Vertical, multistage, barrel pull-out, ring-section pump for underfloor installation on a base frame in the pump sump, radial impellers, single-entry suction impellers, flanges to DIN or ANSI standards
Application
Pumping condensate in power stations and energy systems.

WKTB

Design
Vertical can-type ring-section pump on base frame, multistage, first-stage impeller designed as a double-entry suction impeller, radial impellers. Flanges to DIN or ANSI.
Application
Pumping condensate in power stations and industrial plants

WKTR

Design
Vertical can-type ring-section pump. Type VS6 to API 610 and DIN ISO 13709, multistage, first-stage impeller designed as suction impeller, radial impellers. ATEX-compliant version available.
Application
Pumping condensate and other NPSH-critical products in industrial plants, particularly in refineries and petrochemical plants.

Etachrom B

Design
Horizontal single-stage close-coupled annular casing pump, with ratings and main dimensions to EN 733, with replaceable casing wear rings and motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Application
Cleaning systems (bottle rinsing, crate washing, etc.), water treatment plants, water supply systems, fire-fighting systems, spray irrigation systems, irrigation systems, drainage systems, hot-water heating systems, air-conditioning systems, industrial washing plants, general industry, disposal of paint sludge, surface treatment

Etachrom L

Design
Horizontal single-stage annular casing pump, with ratings and main dimensions to EN 733, with replaceable casing wear rings and motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Application
Cleaning systems (bottle rinsing, crate washing, etc.), water treatment plants, water supply systems, fire-fighting systems, spray irrigation systems, irrigation systems, drainage systems, hot-water heating systems, air-conditioning systems, industrial washing plants, general industry, disposal of paint sludge, surface treatment

Vitacast

Design
Service-friendly volute casing pump with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system. All wetted components are made of 1.4404/1.4409 (AISI 316L/CF3M) stainless steel. Designed with very little dead volume; open impeller, electropolished surface, excellent efficiency. Hygienic design for the highest requirements on cleanability (CIP/SIP-compatible), certified by the TNO Nutrition and Food Research Institute to EHEDG standards. All materials comply with FDA standards and EN 1935/2004. ATEX-compliant version available.
Application
Hygienic handling of fluids in the food, beverage and pharmaceutical industries as well as in the chemical industry.

Vitaprime

Design
Service-friendly close-coupled side channel pump (self-priming) with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system. All wetted components are made of 1.4404/1.4409 (AISI 316L/CF3M) stainless steel. Hygienic design for the highest requirements on cleanability (CIP/SIP-compatible). All materials comply with FDA standards and EN 1935/2004. Trolley available among other accessories. ATEX-compliant version available.
Application
Hygienic handling of fluids in the food, beverage and pharmaceutical industries as well as in the chemical industry.

Ixo N

Design
Multistage close-coupled centrifugal pump for fully or partly submerged operation (min. immersion depth 0.1 m), with low-level inlet, suction strainer with a max. mesh width of 2.0 mm.
Application
Water supply systems, spray irrigation systems, irrigation systems, washing plants, rainwater harvesting and water extraction from wells, reservoirs and rainwater storage tanks

UPA-150C

Design
All-stainless steel single-stage or multistage centrifugal pump in ring-section design for well diameters of 150Â mm (6Â inches) and above.
Application
Spray irrigation systems, irrigation systems, drawdown of groundwater levels, domestic water supply, fountains, heat pump systems, water supply systems

UPA-Control

Design
The KSB switchgear is suitable for level control and protection of submersible borehole pumps, submersible motor pumps and dry-installed pumps with single-phase AC motors 1~ 230 V or three-phase motors 3~ 230 / 400 V / 50 Hz. The motor is started DOL. Enclosure: IP56, dimensions: 205 × 255 × 170 mm (H × W × D).
Application
Irrigation and filling or draining tanks in water supply applications in combination with 4" and 6" pumps.

UPA Chrom 100 CC

Design
Multistage centrifugal pump in ring-section design made of stainless steel for well diameters of 100 mm (4 inches) and above, available with single-phase AC motor or three-phase motor with motor lead. Pump size: UPAchrom 100 CC, UPAchrom 100 CN
Application
Domestic water supply, irrigation and spray irrigation, drawdown of groundwater levels, in fire-fighting systems, cooling circuits, fountains, pressure booster systems and air-conditioning systems.

Ama Drainer 400-500

Design
Vertical single-stage fully floodable submersible motor pumps in close-coupled design, IP68, with or without level control, max. immersion depth: 7 m.
Application
Automatic drainage of pits, shafts, yards and cellars at risk of flooding, lowering of surface water levels, drainage, drainage of underground passages, water extraction from rivers and reservoirs.

Amaclean

Design
Self-cleaning tank insert for grouted installation in new concrete structures or in concrete structures in need of refurbishment. Designed to prevent soiling of the structure and clogging of the pumps by heavily waste or fibre loaded waste water. Suitable for pump stations emitting unpleasant odours and/or gases.
Application
Waste water disposal, rainwater disposal

Ama DS3

Design
Waste water pump station with solids separation system. Indirect hydraulic transport of waste water, solids separators arranged upstream of the pumps, for maximum economic efficiency, operating reliability and ease of servicing.
Application
Municipal and industrial waste water transport. Applications with special drainage requirements, e.g. hotels, hospitals, campgrounds, etc.

Evamatic-box N

Design
Floodable lifting unit for domestic waste water, equipped with either one or two pumps of type Ama-Porter F (free-flow impeller) or Ama-Porter S (cutter)
Application
Disposal of domestic and municipal waste water occurring below the flood level

AU Monobloc

Design
Horizontal, self-priming centrifugal pump in close-coupled design, open or semi-open impeller, adjusted via wear plate, with mechanical seal, driven by electric motors or internal combustion engines, ATEX-compliant version available.
Application
Pumping clean, contaminated and aggressive fluids also containing solids. In fresh water and seawater circuits, fire-fighting applications, as ballast and bilge pumps, and for drainage and waste water applications.

AU

Design
Horizontal, self-priming centrifugal pump, open or semi-open impeller, adjusted via wear plate, with mechanical seal, ATEX-compliant version available.
Application
Pumping clean, contaminated and aggressive fluids also containing solids. In fresh water and seawater circuits, fire-fighting applications, as ballast and bilge pumps, and for drainage and waste water applications.

Etaprime L

Design
Horizontal self-priming volute casing pump, single-stage, with open multi-vane impeller, from size 40-40-140 with bearing bracket, in back pull-out design, ATEX-compliant version available.
Application
Pumping clean, contaminated or aggressive fluids not containing abrasive substances and solids. For use in spray irrigation systems, service water systems, drainage, dewatering systems, fire-fighting systems, drawdown of groundwater levels, domestic water supply, air-conditioning systems, cooling circuits, swimming pools, water supply systems.

Filtra-N

Design
Single-stage self-priming centrifugal pump in close-coupled design.
Application
Pumping clean or slightly contaminated water, swimming pool water with a max. chlorine content of 0.3 %; ozonised swimming pool water with a max. salt content of 7 ‰.

Hollow disk pump

"C" Series - Single body

Design
Positive displacement hollow disk pump with internal seal. The seal is located internally and the pump shaft is supported on roller bearings. This configuration makes the pump compact and economical but providing good performances.
Application
PETROLEUM PRODUCTS, DIESEL, PETROL, KEROSENE, RFO HEAVY OIL, CRUDE OIL, BITUMEN, PARAFFIN, PAINTS, GLUES, RESINS, ISOCYANATE, SOLVENTS, FATS, OILS, PALM OIL, MELASSE, STARCH, WASTE, EXHAUSTED OIL, EXHAUSTED OIL

Hollow disk pump

"C" Series - Double body

Design
Positive displacement hollow disk pump with internal seal. The seal is located internally and the pump shaft is supported on roller bearings. This configuration makes the pump compact and economical but providing good performances.

Application
EXTRA VIRGIN OLIVE OIL, FOOD LIQUIDS, CHOCOLATE, GLUCOSE, HONEY, SYRUP, CORROSIVE PRODUCTS, SOAP, SURFACTANTS

Electropump M40-C-1-B

Design
Bmf pump with cast iron GJL250 body, carbon steel impeller, carbon steel shaft, cast iron GJL250 base, mechanical viton carbon/inox mechanical Seal, having a Flow of 6.4m3/h @ 420 rpm, motor: 1,5 kW, 4 poles, 400v, 50hz, ip55, Atex for zone 1, Pressure max: 6 barg for hydrocarbons fulids.
Application
Desiel, RFO

Hollow disk pump

"C" Series - Tripple body

Design
Positive displacement hollow disk pump with internal seal. The seal is located internally and the pump shaft is supported on roller bearings. This configuration makes the pump compact and economical but providing good performances.

Application
PETROLEUM PRODUCTS, DIESEL, PETROL, KEROSENE, RFO HEAVY OIL, CRUDE OIL, BITUMEN, PARAFFIN, PAINTS, GLUES, RESINS, ISOCYANATE, SOLVENTS, FATS, OILS, PALM OIL, MELASSE, STARCH, WASTE, EXHAUSTED OIL, EXHAUSTED OIL

Pneumatic Actuator Butterfly Valve

Design
Pressure PN 10(MAX) Body Type CI,WCB,CF8,CF8M,Aluminium Disc CI,CF8,CF8M,SG Iron Size 400mm-500mm Actuator Single Double Acting Seat And Seal Nitrile,EPDM,PTFE

Pneumatic Actuator

Design
Pneumatic actuators use air (or another gas) pressure as the primary power source to produce motion, which, in turn, controls the valve. In the most common type of pneumatic actuator, the diaphragm actuator, air is pumped into a hollow casing where the resulting pressure acts on a flexible rubber diaphragm to deflect it from its original position. The diaphragm, which is connected to a valve stem, moves up or down to adjust the pneumatic electric valve disc and control fluid flow. Pneumatic actuators typically produce linear motion but can also be used to generate rotary movement.

Proportional Pneumatic Compressed Air Controlled Valves

Design
Pneumatic diaphragm control valve is the terminal industrial process measurement and control system control device, is composed by pneumatic diaphragm actuator, direct through single-seat,double seat and sleeve valve, etc., which can automatically change the valve trim position according to the control signal system , changing the flow area between the valve trim and the valve seat, to change the valve drag coefficient, to realize the regulation for the medium flow, pressure and level and other process parameters adjustment. Pneumatic diaphragm valve use dual-oriented structure, equipped with multiple spring actuator, with a compact, light weight, sensitive, valve capacity big, flow characteristics of precision, easy to disassembly. Widely used for precise control of gas, liquid, steam and other media, process parameters such as pressure, flow, temperature, level maintained at a set value. Especially for the smaller amount of pressure and small leakage workplace.

Pneumatic Knife Gate Valves

Design
Size 50 Mm To 500 Mm Valve Type Metal To Metal,Uni-Directional Brand Regent Packaging Type Box Surface Finishing Powder Coated Material Stainless Steel Working Pressure 0.5 - 24 bar Operation Type Pneumatic

EKO Plus Electric Actuator

Design
Sealing system/standard: Resilient seated in accordance with EN 1074 (DIN 3352 - 4B) Face-to-face length: acc. to EN 558, basic series 14 (DIN 3202, F4) With flange ends on both sides acc. to EN 1092-1 Low operating torque due to plastic sliding guides on the wedge With electric actuator Maintenance-free and corrosion-resistant stem sealing With triple O-ring sealing Low wear due to wedge guiding and elongated stem bearing Suitable for vacuum of up to 90%

400 Series

Design
Electric actuators designed to meet the needs of diverse actuation applications: Multi-turn torque from 15 to 4,000 Nm Part-turn torque from 280 to 350,000 Nm Linear thrust from 7 to 200 kN PTCS patented planetary gearing system controlling the applied torque with high mechanical efficiency Mechanically configurable torque, 60 - 100% of rated torque Mechanical switch mechanism (MSM) Adjustable stroke: 2 - 1,500 turns Extended stroke: 2 - 15,000 turns 2 DPDT torque switches 2 DPDT position limit switches 1 moving status blinker switch Additional signal options providing extra switches, potentiometer or 4 - 20 mA position transmitter Integral manual override with padlock mode restriction and motor drive priority Modular design to accommodate only the necessary functions required for the application Watertight and dustproof to IP67 according to EN60529

Danais-150

Design
Double-offset butterfly valve, with plastomer seat (also in fire-safe design), metal seat or elastomer seat (FKM [VITON R] or NBR [nitrile]). Lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of nodular cast iron, cast steel, stainless steel, aluminium bronze or duplex stainless steel (254 SMO). Wafer-type body (T1), full-lug body (T4), T4 suitable for downstream dismantling and dead-end service with counterflange. Connections to EN, ASME or JIS. Fire-safe design tested and certified to API 607. Fugitive emissions performance tested and certified to EN ISO 15848-1. ATEX-compliant version in accordance with Directive 2014/34/EU.
Application
Petroleum, gas, chemical and petrochemical industry, marine applications, transport of petroleum products and chemicals, sugar industry, geothermal energy, shipbuilding, low-pressure steam, vacuum service, mining, corrosive fluids, cleaning agents, highly aggressive fluids, brine, paper and pulp industry, fertilisers. All applications requiring offset-disc butterfly valves.

Danais MTII

Design
Double-offset butterfly valve with plastomer seat or metal seat (fire-safe), without gland packing, maintenance-free, with lever or manual gearbox, pneumatic, electric or hydraulic actuator, body made of steel or stainless steel. Wafer-type body (T1), full-lug body (T4) or flanged body (T7) with flat or raised faces. Body types T4 and T7 are suitable for dead-end service. Connections to EN, ASME or JIS. Certified to German TA-Luft Technical Guidelines on Air Quality Control.
Application
Petroleum, gas, chemical and petrochemical industry, nuclear power stations, onshore and offshore plants. Steam, vacuum and all applications requiring offset-disc butterfly valves.

Hya Solo D

Design
Double-offset butterfly valve for cryogenic applications; full-lug body (T4), flanged body (T7) with flat or raised faces, or body with butt weld ends made of stainless steel to ASME Class 150, JIS, fire-safe design. On request degreased for oxygen service. Manual gearbox, pneumatic, electric or hydraulic actuator.
Application
Natural gas liquefaction, onshore and offshore plants. All liquefied gases.

Ecoline-blc-1000

Design
Ball valve to ANSI/ASME with threaded ends (NPT), butt weld or socket weld ends, three-piece body, full bore, floating ball. Plastomer sealing (also in fire-safe design).
Application
General industry, power stations, chemical industry, petrochemical industry and all related branches of industry, paper industry, food industry and pharmaceutical industry.

Ecoline BLT 150-300

Design
Ball valve to ANSI/ASME with flanged ends, two-piece body, full bore, floating ball, plastomer sealing (also in fire-safe design).
Application
General industry, power stations, chemical industry, petrochemical industry and all related branches of industry, paper industry, food industry and pharmaceutical industry.

Ecoline FYC 150-600

Design
Strainer to ANSI/ASME with flanged ends, Y-pattern, bolted cover, cast steel A216 WCB, screen made of stainless steel 304, mesh width 1.5 mm.
Application
Refineries, power stations, process engineering and general industry; water, steam, oil, gas. Other fluids on request.

Ecoline FYF 800

Design
Strainer to ANSI/ASME with threaded sockets (NPT) or socket weld ends (SW), Y-pattern, with bolted cover, forged steel A105, screen made of stainless steel 304. Mesh width 0.8 to 0.9 mm.
Application
Industrial plants, power stations, process engineering, refineries, oil and marine applications; for water, steam, gas, oil and other non-aggressive fluids.

Ecoline GLB 150-600

Design
Globe valve to ANSI/ASME with flanged ends, cast steel/stainless steel body, trim and bellows made of stainless steel, with bolted bonnet, outside screw and yoke, sealed by graphite gland packing and metal bellows, stainless steel/graphite gaskets.
Application
Petrochemical plants, chemical plants, power stations, process engineering and general industrial applications; for thermal oil, steam, toxic and volatile fluids. Other fluids on request.

Boax-CBV13

Design
Centred-disc butterfly valve with epoxy coating. Perfect shut-off in either flow direction. Flanged ends to EN standards, body made of nodular cast iron, valve disc made of stainless steel.
Application
Shut-off or control duties, drinking water, seawater, water supply systems, water treatment systems and water distribution systems, waste water, irrigation, ultra-pure water, air, oil.

Boax S SF

Design
Centred-disc butterfly valve for building services, with heat barrier and elastomer liner (EPDM XU or nitrile K), with lever, manual gearbox or electric actuator (BOAXMAT-S and BOAXMAT-SF models); semi-lug body (T2) or full-lug body (T4) suitable for downstream dismantling and dead-end service. Valve disc made of stainless steel 1.4308, connections to EN.
Application
Heating, ventilation, air-conditioning systems, for drinking water.

Cobra SCBS

Design
Swing check valve to British standards, with flanged ends, metal-seated, body and valve disc made of nodular cast iron, with bolted cover, stainless steel/graphite gaskets.
Application
Water supply systems, water treatment systems and water distribution systems, waste water, irrigation, drinking water, seawater, air, gas, oil.

ACS800 Series 0.55KW - 5600KW SINGLE DRIVES

Design
Your complete drive solution with everything built-in. Cover all possibilities with our ACS800 industrial drives built to truly understand and refine your business. We make your opportunities work with our strong drives family covering your process control needs. Tune into precise performance and control no matter what industry you’re in. These are our industrial drives, our benchmark of performance, expertise and quality, serving you locally on a global scale.
Application
Scalability and performance to control for a broad range of industrial applications, especially process industries A wide power and voltage range up to 5600 kW and 690 V A broad range of options and features to fulfill even the most demanding requirements Energy saving features Direct torque control (DTC), our signature motor control solution Adapted and approved motor control for different environments

Industrial Drives ACS880 Series 0.55KW - 3200KW SINGLE DRIVES

Design
Simplicity and compatibility for all your industrial drive needs With the ACS880 single drives you simplify your world and open all possibilities. You have complete flexibility and capability in wall-mounted or cabinet-built drives. All can be customized to your precise needs in industries such as oil and gas, mining, metals, chemicals, cement, power plants, material handling, pulp and paper, sawmills and marine. Built on ABB’s common drive platform for precision control in a wide range of applications such as cranes, extruders, winches, winders, conveyors, mixers, compressors, pumps and fans.
Application
Intuitive control panel and PC tool Direct torque control (DTC) for precise open and closed loop control Built-in safety features for simplified configuration Communication with all major automation networks Removable memory unit for easy drive commissioning and replacement Energy optimizer and energy efficiency information for monitoring and saving energy Designed for easy service

Industrial Drives ACS800-07LC

F-Series (the Snuggler®) - Parallel Helical Gearmotors

Design
SEW-Eurodrive’s F-Series parallel helical gearmotor is the ideal drive for tight spaces. This compact drive, with its multiple mounting configurations and shaft designs, is a rugged alternative to right-angle gearmotors.

R-Series Parallel Gearmotors

Design
SEW-Eurodrive’s R-Series parallel gearmotors deliver exceptional performance and reliability combined with low maintenance. Available in many configurations, they continually distinguish themselves with their high efficiency and durable gearing

K-Series - Helical-Bevel Gearmotors

Design
SEW-Eurodrive’s K-Series helical-bevel gearmotors contain high torque density with the highest efficiency available in a right-angle design. Instead of losing energy via the sliding friction of a worm gear, the K-series uses much lower rolling friction of helical and bevel gears. The result is minimum heat and maximum energy savings to the end user.

ARGAL TMA 10.14 Self Priming

Design
Higher suction head and shorter priming times than self priming centrifugal pumps
Can draw liquid with 1.9 SG from negative 3.5m at 20 degC
30-300 L/min flows (10 m3 at 14m head)
415VAC 3 Phase TEFC motors
BSP Threaded or ANSI flange connections
0-90 DegC Temperature range
Max 1.95 SG with CTFE liquid end
Up to 30% Acid or Alkaline Applications (0-80DegC) with standard PP liquid end
Optional CTFE liquid end for greater chemical compatibility and temp range (0-100 DegC)
Viton or EPDM O-ring

Argal TMB Light Duty

Design
Light duty chemical transfer pumps
10-70 L/min Flows
240VAC Single Phase 2 pole splashproof motor
BSP threaded connection on all models (Except TMB10 which is hosetail connection)
0-60 DegC Temperature range
Max 1.1 SG
Up to 30% Acid or Alkaline Applications with standard PP liquid end
Optional CTFE liquid end for greater chemical compatibility – TMB35 only
Viton or EPDM O-ring
120VAC/60Hz UL approved motors available on request – all models excl. TMB10
TMB10 available in 12VDC with Noryl head

Argal TMR G3 Large Duty

Design
Medium to large aggressive chemical transfer pump
Hermetically sealed. Static Gasket
80-800 L/min Flows
Up to 40 metres head
415VAC 3 Phase TEFC motors (Special motors upon request)
Max 1.35 SG
ANSI or ISO flange connection
0-100 DegC Temperature range
No Chemical Limitations
Light Abrasives
Dry run possible using self aligning guide bushings in HD carbon
Balanced Impellers
Wetted end guard plates in S/S
Baseplates available upon request
Custom selection service for each application

PVC 4 CORE FLAT CABLES

Design
A Submersible Pump Cable is a specialized product to be used for submersible pump in a deep well. The area of installation is physically restrictive, and the environment is very hostile. Rialto is designed and manufacured keeping in mind these factors to achieve the highest possible degree of reliability.

RUBBER WELDING CABLE

Design
A Submersible Pump Cable is a specialized product to be used for submersible pump in a deep well. The area of installation is physically restrictive, and the environment is very hostile. Rialto is designed and manufacured keeping in mind these factors to achieve the highest possible degree of reliability.

BUILDING WIRES

Design
Fixed installation in conduits and under plaster.
For appliance wiring and distribution station like Commercial Complexes, Buildings, Factories, Commercial construction, Hospitals and Residencies Apartments etc.
Standard length cable packing: Coils 90m & 180m in carton boxes, reels.